Thunder Laser Nova 51 Y Axis Not Working. Thunder Nova 51 Unboxing and Setup YouTube Please power off the machine, re-connect the interface then try again Thunder Laser USA has the best support in the industry, bar none
Thunder Laser Nova 51 Thunder Laser Ireland from thunderlaserireland.com
Relay switch that controls exhaust and air assist so they stop running when laser is not working: Warning Light: We have four models of Nova and they're named by how wide the work area is
Thunder Laser Nova 51 Thunder Laser Ireland
Preface: The information below will cover testing the X and Y endstops to troubleshoot X or Y axis motion issues on your Thunder Laser Nova Series machine The information in this article can be used when swapping X to Y motor positions or when replacing a worn out motor with a new motor. Since the laser is not able to work beyond its working
6 Things to Know and Be Ready For ll Thunder Lasers Nova 51 Tips YouTube. Preface: This article covers how to swap a motor on a Thunder Laser Nova series machine Nova 35 Nova 51 Nova 63; Engraving / Working Area: 23.6″ x 15.7″ x 6.1″ (desktop model - a stand is recommended)
Thunder Laser Nova 51 Unloading and Unboxing ll My Initial Opinion. Page 25 If the y-axis limit switch is working properly, please open the laser tube cover, check if the interfaces of y-axis motor are connected well, like below Since the laser is not able to work beyond its working